Skip to main content

Laundry day should be smooth sailing, but when your washing machine starts acting up, it can throw a wrench in your plans. We understand the frustration of encountering common problems that disrupt your laundry routine. Today, we will discuss and explore the most common washing machine problems and solutions to tackle them head-on.

1. Start-up Failures

It is a frequent washing machine issue referring to the circumstance where the machine fails to begin the wash cycle. Power supply problems are a typical reason for start-up failure. A defective door switch is another possible reason. If the door switch is broken or misaligned, it may fail to rightly record the door closure, resulting in a start-up failure. Furthermore, problems with the control panel or electronic control board might cause the system to fail to start.

Solution: Inspect the power source, ensure your washing machine is securely connected, and check the door switch for wear and tear or misalignment. If everything appears to be in order, check the circuit breaker and, if required, reset it.

2. Excessive Noise

Excessive noise during operation is another common problem with washing machines. An unbalanced load can be a potential reason for this problem. Another possible reason could be a worn-out drum bearing or broken/loose components such as belts, pulleys, or motor mounts.

Solution: Before you call the washing machine repair service, check the balance of the machine by adjusting the leveling feet. Ensure your laundry is evenly distributed inside the drum. If the noise and vibrations continue, it may be time to replace worn-out drum bearings or faulty shock absorbers.

3. Water Leaks

Water leaks can occur in washing machines, causing potential damage to the surrounding area. A malfunctioning intake valve is one probable source of water leaks. Otherwise, a worn-out or broken door seal/gasket is another possible cause. Water might leak from the machine due to blocked or broken drain hoses or pump filters.

Solution: To fix the water leakage with your washing machine, inspect the hoses for cracks or bulges and replace them if necessary. Check all connections, ensuring they are tight and secure. If leaks continue, consider replacing the water inlet valve.

4. Failure to Drain or Spin

It may become frustrating when a washing machine fails to drain or spin. One common cause of this problem is a clogged or obstructed drain pump or hose. A malfunctioning lid switch could be another possible cause of it. Additionally, issues with the motor, belt, or control board can lead to a failure to drain or spin.

Solution: Clear any blockages in the drainage hose and clean the drain pump filter regularly. If the problem continues, it is time for a washer-dryer repair or to replace the drain pump.

5. Foul Odors

Foul odors emanating from the washing machine can be unpleasant. Mold and mildew growth inside the drum or other components might be one source of this problem. Using too much detergent or an improper detergent can also contribute to foul odors. Additionally, leaving wet clothes inside the machine for an extended period raises this problem.

Solution: Run a hot water cycle with bleach or vinegar to eliminate odors. Keep the door or lid open between washes to promote airflow and prevent mold growth.


You can troubleshoot the issue more effectively by understanding the general issues and possible causes of your washing machine malfunctioning. Please note that these are some common possible suggestions and not definitive solutions for these problems. We recommend referring to the manufacturer’s instructions before troubleshooting and calling a professional for washing machine and dryer repair service.

Appliance Repair General is one of the most reputed and experienced appliance repair firms specializing in repairing multiple household appliances, including microwave ovens, refrigerators, ice makers, air conditioners, and more.

Leave a Reply